HP 5920 Series Command Reference Manual page 535

Examples
# Display IPv6 IS-IS route information.
<Sysname> display isis route ipv6
Destination: 2001:1::
Flag
Next Hop
Destination: 2001:2::
Flag
Next Hop
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
Destination: 2001:1::
Flag
Destination: 2001:2::
Flag
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
Table 132 Command output
Field
Destination
PrefixLen
Flag/Flags
Cost
Next Hop
Interface
Route information for IS-IS(1)
------------------------------
Level-1 IPv6 Forwarding Table
-----------------------------
: R/L/-
: FE80::200:5EFF:FE64:8905
: D/L/-
: Direct
Level-2 IPv6 Forwarding Table
-----------------------------
: -/-/-
: D/L/-
Description
IPv6 destination prefix.
Length of the prefix.
Route flag:
•
D—This is a direct route.
•
R—The route has been added into the routing table.
•
L—The route has been advertised in an LSP.
•
U—Route leaking flag, indicating that the Level- 1 route is from Level-2. U means the
route will not be returned to Level-2.
Route cost.
Next hop.
Outbound interface.
PrefixLen: 64
Cost
Interface: Vlan1
PrefixLen: 64
Cost
Interface: Vlan1
PrefixLen: 64
Cost
PrefixLen: 64
Cost
522
: 20
: 10
: 20
: 10