HP 5920 Series Command Reference Manual page 118

Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays information about ABR summary routes for all OSPF processes.
area area-id: Specifies an OSPF area by its ID. The area ID is an IP address or a decimal integer in the
range of 0 to 4294967295 that is translated into the IP address format. Without this option, the
command displays information about ABR summary routes for all OSPF areas.
ip-address: Specifies a summary route by its IP address.
mask-length: Specifies the mask length in the range of 0 to 32.
mask: Specifies the mask in dotted decimal notation.
verbose: Displays detailed ABR summary route information. Without this keyword, the command
displays brief ABR summary route information.
Usage guidelines
If no IP address is specified, this command displays information about all summary routes on the ABR.
Examples
# Display brief information about summary routes on the ABR.
<Sysname> display ospf abr-summary
Total summary addresses: 1
Net
100.0.0.0
Table 26 Command output
Field
Area
Total summary addresses
Net
Mask
Status
Count
Cost
# Display detailed information about summary routes on the ABR.
<Sysname> display ospf abr-summary verbose
OSPF Process 1 with Router ID 2.2.2.2
ABR Summary Addresses
Area: 0.0.0.1
Mask
255.0.0.0
OSPF Process 1 with Router ID 2.2.2.2
Status Count
Advertise 1
Description
Area to which the summary routes belong.
Total number of summary routes.
Address of the summary route.
Mask of the summary route address.
Advertisement status of the summary route.
Number of summarized routes.
Cost to the summary network.
105
Cost
(Not Configured)