HP 5920 Series Command Reference Manual page 63

Default
No static route is configured.
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance s-vpn-instance-name: Specifies a source MPLS L3VPN instance by its name, a case-sensitive
string of 1 to 31 characters. Each VPN has its own routing table, and the configured static route is
installed in the routing tables of the specified VPNs.
dest-address: Specifies the destination IP address of the static route, in dotted decimal notation.
mask-length: Specifies the mask length, an integer in the range of 0 to 32.
mask: Specifies the subnet mask in dotted decimal notation.
vpn-instance d-vpn-instance-name: Specifies a destination MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If a destination VPN is specified, packets will search for the
output interface in the destination VPN based on the configured next hop address.
next-hop-address: Specifies the IP address of the next hop, in dotted decimal notation.
backup-interface interface-type interface-number: Specifies a backup output interface by its type and
number. If the backup output interface is an NBMA interface or broadcast interface and not a P2P
interface, you must specify the backup next hop address. Broadcast interfaces include Ethernet interfaces,
virtual template interfaces, and VLAN interfaces.
backup-nexthop backup-nexthop-address: Specifies a backup next hop address.
bfd: Enables BFD to detect reachability of the static route's next hop. When the next hop is unreachable,
the system immediately switches to the backup route.
control-packet: Specifies the BFD control mode.
bfd-source ip-address: Specifies the source IP address of BFD packets. HP recommends that you specify
the loopback interface address.
permanent: Specifies the route as a permanent static route. If the output interface is down, the permanent
static route is still active.
track track-entry-number: Associates the static route with a track entry specified by its number in the
range of 1 to 1024. For more information about Track, see High Availability Configuration Guide.
echo-packet: Specifies the BFD echo mode.
public: Indicates that the specified next hop address is on the public network.
interface-type interface-number: Specifies an output interface by its type and number. If the output
interface is an NBMA interface or broadcast interface and not a P2P interface, the next hop address
must be specified. Broadcast interfaces include Ethernet interfaces, virtual template interfaces, and VLAN
interfaces.
preference preference-value: Specifies a preference for the static route, in the range of 1 to 255. The
default is 60.
50