HP 5920 Series Command Reference Manual page 425

Parameters
nib-id: Specifies a NIB by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed IPv6 static route next hop information. Without this keyword, the command
displays brief IPv6 static route next hop information.
Examples
# Displays brief IPv6 static route next hop information.
<Sysname> display ipv6 route-static nib
Total number of nexthop(s): 35
NibID: 0x21000000
Type: 0x41
UserKey0: 0x0
UserKey1: 0x0
IFIndex: 0x0
NibID: 0x21000001
Type: 0x41
UserKey0: 0x0
UserKey1: 0x0
IFIndex: 0x0
...
Table 97 Command output
Field
NibID
NibSeq
Type
Flushed
UserKey0
UserKey1
VrfNthp
Nexthop
IFIndex
LocalAddr
# Displays detailed IPv6 static route next hop information.
<Sysname> display ipv6 route-static nib verbose
Total number of nexthop(s): 35
NibID: 0x21000000
Type: 0x41
UserKey0: 0x0
Sequence: 0
Flushed: Yes
VrfNthp: 0
Nexthop: 2::3
LocalAddr: ::
Sequence: 1
Flushed: Yes
VrfNthp: 0
Nexthop: 3::4
LocalAddr: ::
Description
ID of the NIB.
Sequence number of the NIB.
Type of the NIB.
Indicates whether the route with the NIB has been flushed to the
FIB.
Reserved data 1.
Reserved data 2.
VPN instance to which the next hop belongs.
Next hop address.
Interface index
Local interface address.
Sequence: 0
Flushed: Yes
VrfNthp: 0
412