HP 5920 Series Command Reference Manual page 143

Table 45 Command output
Field
SpfNode
SpfLink
# Display detailed topology information for area 0 in OSPF process 1.
<Sysname> display ospf 1 area 0 spf-tree verbose
OSPF Process 1 with Router ID 100.0.0.4
Flags: S-Node is on SPF tree
I-Node or Link is init
P-Neighbor is parent
C-Neighbor is child
H-Nexthop changed
V-Link is involved
Area: 0.0.0.0
>LsId(192.168.119.130)
AdvId : 100.0.0.4
Mask : 255.255.255.0
VlinkData: 0.0.0.0
NextHop : 1
Description
SPF node, represented by a router ID when the node
type is Router, or the IP address of the DR when the
node type is Network.
Node flag:
•
•
•
•
•
SPF link, representing the peer node.
Link type:
•
•
•
Link flag:
•
•
•
•
•
•
•
•
R-Node is directly reachable
D-Node or Link is to be deleted
A-Node is in candidate list
G-Link is in change list
N-Link is a new path
Shortest Path Tree
NodeType : Network
SPFLinkCnt : 2
ParentLinkCnt: 1
130
I—The node is in initialization state.
A—The node is on the candidate list.
S—The node is on the SPF tree.
R—The node is directly connected to the root node.
D—The node is to be deleted.
RT2RT—Router to router.
NET2RT—Network to router.
RT2NET—Router to network.
I—The link is in initialization state.
P—The peer is the parent node.
C—The peer is the child node.
D—The link is to be deleted.
H—The next hop is changed.
V—When the peer node is deleted or added, the
peer node is not on the SPF tree or is deleted.
N—The link is newly added, and both end nodes
are on the SPF tree.
G—The link is on the area change list.
Distance: 10
NodeFlag: S R