Display Isis Non-Stop-Routing Event-Log - HP 5920 Series Command Reference Manual

Parameters
process-id: Displays the host name to system ID mapping table for an IS-IS process specified by its ID in
the range of 1 to 65535. Without this argument, the command displays the host name to system ID
mapping table for all IS-IS processes.
Examples
# Configure a name RUTA for the local IS system.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name RUTA
# Map the host name RUTB to the system ID 0000.0000.0041 of a remote IS.
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
# Display the IS-IS host name to system ID mapping table.
[Sysname-isis-1] display isis name-table
---------------------------------------------------------------
System ID
6789.0000.0001
0000.0000.0041
Table 57 Command output
Field
System ID
Hostname
Type

display isis non-stop-routing event-log

Use display isis non-stop-routing event-log to display IS-IS NSR log information.
Syntax
display isis non-stop-routing event-log slot slot-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its ID.
Examples
# Display IS-IS NSR log information.
Name table information for ISIS(1)
Hostname
RUTA
RUTB
Description
System ID.
Host name.
Mapping type:
•
Static.
•
Dynamic.
198
Type
DYNAMIC
STATIC