Maximum Load-Balancing - HP 5920 Series Command Reference Manual

allow-ibgp: Allows redistribution of IBGP routes. This keyword is available when the protocol argument
is set to bgp4+.
cost cost: Specifies a metric for redistributed routes, in the range of 0 to 16. The default metric is 0.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters.
Usage guidelines
The import-route bgp4+ command redistributes only EBGP routes. The import-route bgp4+ allow-ibgp
command redistributes both EBGP and IBGP routes.
Examples
# Redistribute routes from IPv6 IS-IS process 7 into RIPng and set the metric for redistributed routes to 7.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] import-route isisv6 7 cost 7

maximum load-balancing

Use maximum load-balancing to specify the maximum number of equal-cost multi-path (ECMP) routes for
load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing number
undo maximum load-balancing
Views
RIPng view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of ECMP routes. When this argument takes a value of 1, RIPng
does not perform load balancing.
Usage guidelines
The default maximum number of RIPng ECMP routes equals the maximum number of ECMP routes
supported by the system.
If you use the max-ecmp-num command to configure the maximum number of ECMP routes supported by
the system to m, the default setting of this command is m, and the value range for this command is 1 to
m.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
429