Bandwidth-Reference (Is-Is View) - HP 5920 Series Command Reference Manual

Interface bandwidth
≤155 Mbps
≤622 Mbps
≤2500 Mbps
>2500 Mbps
Examples
# Enable automatic link cost calculation for IS-IS process 1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] auto-cost enable
Related commands
bandwidth-reference
•
cost-style
•
isis cost
•

bandwidth-reference (IS-IS view)

Use bandwidth-reference to set the bandwidth reference value for automatic link cost calculation.
Use undo bandwidth-reference to restore the default.
Syntax
bandwidth-reference value
undo bandwidth-reference
Default
The bandwidth reference value is 100 Mbps.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
value: Specifies the bandwidth reference value in the range of 1 to 2147483648 Mbps.
Examples
# Configure the bandwidth reference of IS-IS process 1 as 200 Mbps.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] bandwidth-reference 200
Related commands
auto-cost enable
•
• isis cost
Cost
40
30
20
10
185