HP 5920 Series Command Reference Manual page 124

Restarter : None
Helper : None
Area: 0.0.0.0
Authtype: None Area flag: Normal
Area up Interface count: 2
Interface: 40.4.0.1 (Vlan-interface40)
Restarter state: Normal
Last exit reason:
Restarter : None
Helper : None
Neighbor count of this interface: 1
Number of neighbors under Helper: 0
Neighbor IP address
3.3.3.3 40.4.0.3
Virtual-link Neighbor-ID
Restarter state: Normal
Interface: 20.2.0.1 (Vlink)
Transit Area: 0.0.0.1
Last exit reason:
Restarter : None
Helper : None
Neighbor IP address
4.4.4.4 20.2.0.4
Table 31 Command output
Field
OSPF Process 1 with Router ID 1.1.1.1
Graceful Restart information
Graceful Restart capability
Graceful Restart support
State: P-2-P Type: PTP
GR state
Normal
-> 4.4.4.4, Neighbor-State: Full
GR state
Normal
Description
GR information for OSPF process 1 with router ID 1.1.1.1.
Indicates whether GR is enabled:
•
•
•
GR modes that the process supports (the modes are
displayed only when GR is enabled):
•
•
•
•
111
Last Helper exit reason
None
Last Helper exit reason
Reset neighbor
Enable(IETF)—IETF GR is enabled.
Enable(Nonstandard)—Non-IETF GR is enabled.
Disable—GR is disabled.
Planned and un-planned—Supports both planned and
unplanned GR.
Planned only—Supports only planned GR.
Partial—Supports partial GR.
Global—Supports global GR.