Display Ripng Route - HP 5920 Series Command Reference Manual

Field
Poison-reverse
MetricIn/MetricOut
Default route
Default route cost

display ripng route

Use display ripng route to display all RIPng routes for a RIPng process.
Syntax
display ripng process-id route [ ipv6-address prefix-length [ verbose ] | peer ipv6-address | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6
address. The prefix-length argument specifies a prefix length in the range of 0 to 128.
verbose: Displays all routing information for the specified destination IPv6 address. Without this keyword,
the command displays only optimal RIPng routes with the specified destination IPv6 address.
peer ipv6-address: Specifies a neighbor by its IPv6 address.
statistics: Displays routing information statistics, including total number of routes and the number of
routes learned from each neighbor.
Examples
# Display routing information for RIPng process 1.
<Sysname> display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::20C:29FF:FE7A:E3E4 on Vlan-interface2
O - Optimal, F - Flush to RIB
Description
Indicates whether the poison reverse function is enabled:
•
On—Enabled.
•
Off—Disabled.
Additional metric to incoming and outgoing routes.
•
Only—The interface advertises only a default route.
•
Originate—The interface advertises a default route and
other RIPng routes.
•
Off—In this state, the interface does not advertise a default
route.
•
In garbage-collection status—In this state, the interface
advertises a default route with a metric of 16.
Cost of the default route.
423