AdvRouter: 192.168.1.2
SubProtoID: 0x1
NextHop: 192.168.1.2
IfType: Broadcast
Interface: Vlan10
NibID: 0x0
Destination: 172.16.0.0/16
Cost: 1563
AdvRouter: 192.168.1.1
SubProtoID: 0x1
NextHop: 192.168.1.1
IfType: Broadcast
Interface: Vlan20
NibID: 0x0
Total Nets: 2
Intra Area: 2
Inter Area: 0
Table 44 Command output
Field
Priority
SubProtoID
Preference
NbrId
NextHop
BkNextHop
IfType
BkIfType
Interface
BkInterface
NibID
Status
Area: 0.0.0.0
Preference: 10
BkNextHop: N/A
BkIfType: N/A
BkInterface: N/A
Status: Local
Type: Inter
Area: 0.0.0.0
Preference: 10
BkNextHop: N/A
BkIfType: N/A
BkInterface: N/A
Status: Local
ASE: 0
NSSA: 0
Description
Prefix priority: critical, high, medium, and low.
Sub protocol ID.
OSPF route preference.
Neighbor router ID.
Primary next hop IP address.
Backup next hop IP address.
Type of the network to which the primary next hop belongs.
Type of the network to which the backup next hop belongs.
Output interface.
Backup output interface.
Next hop ID.
Route status:
•
Local—The route is on the local end and is not sent to the route management
module.
•
Invalid—The next hop is invalid.
•
Stale—The next hop is stale.
•
Normal—The route is available.
•
Delete—The route is deleted.
•
Host-Adv—The route is a host route.
•
Rely—The route is a recursive route.
128