Apply Extcommunity; Apply Isis - HP 5920 Series Command Reference Manual

<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match tag 8
[Sysname-route-policy-policy1-10] apply cost-type internal

apply extcommunity

Use apply extcommunity to apply the specified extended community attribute.
Use undo apply extcommunity to restore the default.
Syntax
apply extcommunity { rt route-target }&<1-32> [ additive ]
undo apply extcommunity
Default
No extended community attribute is set for BGP routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
{ rt route-target }&<1-32>: Sets the RT extended community attribute, a string of 3 to 21 characters.
&<1-32> indicates that the argument before it can be entered up to 32 times.
A route-target has the following forms:
16-bit AS number:32-bit self-defined number. For example, 101:3. The AS number is in the range of
•
0 to 65535, and the self-defined number is in the range of 0 to 4294967295.
32-bit IP address:16-bit self-defined number. For example, 192.168.122.15:1. The self-defined
•
number is in the range of 0 to 65535.
32-bit AS number:16-bit self-defined number. For example, 70000:3. The AS number is in the range
•
of 65536 to 4294967295, and the self-defined number is in the range of 0 to 65535.
additive: Adds the specified attribute to the original extended community attribute.
Examples
# Configure node 10 in permit mode for routing policy policy1 to add the RT extended community
attribute 100:2 to BGP routes matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1
[Sysname-route-policy-policy1-10] apply extcommunity rt 100:2 additive

apply isis

Use apply isis to redistribute routes into a specified ISIS level.
Use undo apply isis to restore the default.
555