Display Ip Policy-Based-Route Setup - HP 5920 Series Command Reference Manual

network-operator
Parameters
slot slot-number: Displays the PBR configuration and statistics on an IRF member device. The slot-number
argument is the ID of the IRF member device.
Examples
# Display local PBR configuration and statistics.
<Sysname> display ip policy-based-route local
Policy based routing information for local:
Policy name: aaa
node 0 deny:
Matched: 0
node 1 permit:
if-match acl 3999
Matched: 0
node 2 permit:
if-match acl 2000
apply next-hop 2.2.2.2
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1.1.1.1
Matched: 0
Total matched: 0
Table 95 Command output
Field
Policy based routing information for
local
node 0 deny/node 2 permit
if-match acl
apply next-hop
Matched: 0
Total matched
Related commands
reset ip policy-based-route statistics

display ip policy-based-route setup

Use display ip policy-based-route setup to display PBR configuration.
Syntax
display ip policy-based-route setup
Description
Local PBR configuration and statistics.
Match mode of the node: permit or deny.
Match packets against the ACL.
Specify a next hop for permitted packets.
Number of successful matches on the node.
Total number of successful matches on all nodes.
406