Ipv6 Preference - HP 5920 Series Command Reference Manual

Use undo ipv6 maximum load-balancing to restore the default.
Syntax
ipv6 maximum load-balancing number
undo ipv6 maximum load-balancing
Views
IS-IS view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of ECMP routes.
Usage guidelines
The default maximum number of IPv6 IS-IS ECMP routes equals the maximum number of ECMP routes
supported by the system.
If you use the max-ecmp-num command to configure the maximum number of ECMP routes supported by
the system to m, the default setting of this command is m, and the value range for this command is 1 to
m.
Examples
# Configure the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] ipv6 maximum load-balancing 2

ipv6 preference

Use ipv6 preference to configure the preference for IPv6 IS-IS.
Use undo ipv6 preference to restore the default.
Syntax
ipv6 preference { preference | route-policy route-policy-name } *
undo ipv6 preference
Default
The preference for IPv6 IS-IS is 15.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
preference: Specifies a preference for IPv6 IS-IS, in the range of 1 to 255.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters.
537