Setup Menu #2; Serial Input/Output Setup - Cardinal 225 Installation And Technical Manual

SETUP MENU #2

SERIAL INPUT/OUTPUT SETUP

With SETUP MENU #1 displayed, press NEXT (Navigation Keys  Down Arrow) to proceed to
SETUP MENU #2.
1. SERIAL
2. DIO
3. PRINT TABS
4. SETUP SCALE 1
5. CALIBRATE 1
Enter Selection: 0
1. SERIAL (SERIAL INPUT/OUTPUT)
With SETUP MENU #2 displayed, press the 1 key and then the ENTER key to proceed to
the Serial Menu.
1. COM0
2. COM1
3. COM2
4. COM3
Enter Selection: 0
1. COM0 (COM0)
With the Serial Menu displayed, press the 1 key and then the ENTER key to proceed to the
COM0 SETUP MENU.
1. BAUD=X XXXXXX
2. PARITY=X XXXX
3. BITS=X
4. STOPS=X
5. CONT=XXX
Enter Selection: 0
50
CALIBRATION AND SETUP, CONT.
SETUP MENU #2
Serial Menu
COM0 SETUP MENU
8200-M698-O1 Rev B  225 Installation and Technical
` NEXT ^ PREV
^ EXIT
6. TYPE=X XXXXXXXXXX
7. SCALE = 0
8. Gross Only = NO
^ EXIT