Ascii Commands - Cardinal 225 Installation And Technical Manual

The Model 225 indicator will respond to ASCII coded serial data, in the format below, when
input to the RXD serial input.
 The commands are ASCII strings, without spaces, followed by a carriage return <cr>
and can be upper or lower case, or any combination.
 Data inside parenthesis is the parameter item designator (e.g. "PWC (1) <cr>" requests
the value of PWC number 1 preset to be transmitted from the indicator).
 A command followed by the equal sign "=" is a set command and must be followed by
the data desired to be stored for that parameter.
 Any command without an equal sign requests data to be transmitted from the indicator
(a query command).
 Commands that set more than one value use commas between the values.
 To verify data has been stored correctly in the indicator, send the command to request
the same data to be transmitted from the indicator.
Commands
Command
Gross<cr>
Tare<cr>
Tare=123<cr>
Net<cr>
PWC (1)<cr>
PWC (1)=123<cr>
Fast<cr>
Fast=123<cr>
Slow<cr>
Slow=123<cr>
Fill<cr>
Fill=123<cr>
Trim<cr>
Trim=123<cr>
Accum(g)<cr>
Accum(n)=100<cr>
Ing(1)<cr>
Ing(1)=1,100,150<cr>
Trim(1)<cr>
Trim(1)=100<cr>
ID()<cr>
ID(1)<cr>
ID(1)=ref,100,0<cr>
Key(x)<cr>
<cr> = carriage return

ASCII COMMANDS

Response
1000lb G
100lb T
OK
900lb N
100lb PWC1
OK
100lb F
OK
100lb F
OK
100lb F
OK
100lb TRM
OK
1000lb
OK
1 100lb 1200lb
OK
100lb TRM1
OK
id(x)=r,1,2
id(1)=r,1,2
OK
Results of (x) function.
8200-M698-O1 Rev B  225 Installation and Technical
Description
Transmit Gross Weight
Transmit Current Tare
Set Tare To Value
Transmit Net Weight
Transmit PWC Value
Set PWC To Value
Transmit 2 Speed DFC Fast Value
Set 2 Speed DFC Fast Value
Transmit 2 Speed DFC Slow Value
Set 2 Speed DFC Slow Value
Transmit 1 Speed DFC Value
Set 1 Speed DFC Value
Transmit DFC Trim Value
Set DFC Trim Value
Transmit Accumulator Valid Selections
G/N/C/1-7
Set Accumulator
Transmit Ingredient (Bin, Fast, Slow)
Set Ing (Bin, Fast, Slow)
Transmit Batcher Trim For Ing X
Set Batcher Trim
List ALL IDs ID(ID)=Ref, Tare, Accum
List A Single ID
Add Or Replace An ID
Performs function of (x) as if key was
pressed. See Valid Key Names.
123