Display Contrast Adjustment - Cardinal 225 Installation And Technical Manual

TIME, DATE AND CONSECUTIVE NUMBER, CONT.
24-Hour Clock Format Selected in Setup (TIME=24)
1. With the indicator in normal operations mode, press the TIME/DATE key.
2. The display will change to show TIME=XXXXXX, where XXXXXX is the current time.
3. If the time displayed is correct, press the ENTER key and proceed to step 5.
4. Otherwise, using the numeric keys, enter the correct time (HHMMSS) and then press
the ENTER key.
IMPORTANT! With a 24-hour clock format, AM and PM times are entered differently.
 When entering times before noon, the actual time is entered. For example, 8:30
AM would be entered (and would print on the ticket) as 083000.
 When entering times after noon, you must add 12 to the time. For example, 8:30
PM would be entered (and would print on the ticket) as 203000.
5. The display will change to show DATE = XXXXXX. Note that XXXXXX is the current
date displayed in the format selected during Calibration and Setup. See the USA=
parameter in SETUP MENU #1.
6. If the date displayed is correct, press the ENTER key and proceed to step 8.
7. Otherwise, using the numeric keys, enter the correct date (in the format selected during
Calibration and Setup, MMDDYY or DDMMYY) and then press the ENTER key.
8. The display will change to show CNC NO=XXXXXX, where XXXXXX is the current
consecutive number.
9. If the consecutive number displayed is correct, press the ENTER key to return to normal
operations.
10. Otherwise, using the numeric keys, enter the new consecutive number (6 digits max.)
and then press the ENTER key to return to normal operations.

DISPLAY CONTRAST ADJUSTMENT

The Model 225 indicator uses a combination of the SHIFT, ENTER and SPACE keys to adjust
the contrast of the LCD display.
To Increase the LCD Contrast
1. With the indicator in normal operations mode, press and hold the SHIFT key and
then press the ENTER key.
2. Repeat pressing the ENTER key to increase the contrast to the desired level.
3. When the LCD contrast is at the desired level, stop pressing the ENTER key and
release the SHIFT key to save the setting and return to normal operating mode.
To Reduce the LCD Contrast
1. With the indicator in normal operations mode, press and hold the SHIFT key and
then press the SPACE key.
2. Repeat pressing the SPACE key to reduce the contrast to the desired level.
3. When the LCD contrast is at the desired level, stop pressing the SPACE key and
release the SHIFT key to save the setting and return to normal operating mode.
42 8200-M698-O1 Rev B  225 Installation and Technical