Key Lockout - Cardinal 225 Installation And Technical Manual

KEY LOCKOUT

6. KEY LOCKOUT (KEY LOCKOUT)
The key lockout parameter determines which keys are locked during normal operation.
Pressing a locked key during normal operation will result in a warning beep, a 1/2 second
display of -LOCKED- and the key will be ignored.
With the SETUP MENU #3 displayed press the 6 key and then the ENTER key. The display
will change to show the Key LOCKOUT Menu.
1. ZERO=NO
2. TARE=NO
3. NET=NO
4 PRINT=NO
4. TIME=NO
Enter Selection: 0
1. The display will change to show the 11 keys that can be locked and the current status
for each key.
2. If the status of each key displayed is acceptable, press the ENTER key to exit and
return to SETUP MENU #3.
3. Otherwise, to change the lockout status of a key, use the numeric keys to select the key
to change and then press the ENTER key.
4. The display will change to show Lockout XXXXXX? XXX and turn on the YES
and NO soft keys. Note that XXXXXX is the key and XXX is the current lockout status.
1. ZERO=NO
2. TARE=NO
3. NET=NO
4 PRINT=NO
4. TIME=NO
Lockout XXXXXX? XXX
YES
5. Press the YES or NO (on the soft keys) and then the ENTER key to save the new
setting and return to the Key LOCKOUT Menu.
6. Continue with this procedure until the status of each key has been entered.
7. After the last key lockout status has been entered, press the ENTER key to exit and
return to SETUP MENU #3.
90
CALIBRATION AND SETUP, CONT.
Key LOCKOUT Menu
6. UNITS=NO
7. ACCUM=NO
8. KEYPAD=NO
9. ID=NO
10. COUNT=NO
Key LOCKOUT Menu
6. UNITS=NO
7. ACCUM=NO
8. KEYPAD=NO
9. ID=NO
10. COUNT=NO
8200-M698-O1 Rev B  225 Installation and Technical
11. GREEN=NO
11. GREEN=NO
NO