Shift Key Combinations - Cardinal 225 Installation And Technical Manual

Alphanumeric Keys, Cont.
SHIFT
This key is used for several functions. It is used in combination with the Navigation ENTER
key (red square key in center of the Navigation arrows) to enter the Calibration and Setup
mode.
During Calibration and Setup (as well as during normal operations), pressing the key before
pressing an alphanumeric key will toggle the key to output its alternate meaning. For
example, when combined with an alphabetic key, the SHIFT key causes a lower case letter
(not a capital letter) to be output.

Shift Key Combinations

SHIFT, ESC, ACCUM KEY
The 225 will retain and display on command the maximum weight value measured since the
indicator has begun operation or since the maximum value was last cleared. The maximum
value is displayed by pressing the SHIFT key, the ESC key and then the ACCUM key when
the display is showing the FUNCTION= prompt. Press the ENTER key to exit and return
to normal operation.
SHIFT, ESC, PRINT KEY
This combination is used to change the selected print ticket format. Pressing the SHIFT
key, the ESC key and then the PRINT key when the display is showing the FUNCTION=
prompt. The display will change to show PRINT=X. Note that X is the current ticket
format selected.
If the setting displayed is acceptable, press the ENTER key to exit and return to normal
operation. Otherwise, using the numeric keys enter the new value for the ticket format and
then press the ENTER key to exit and return to normal operation.
0 = Print Tab Settings
1 = Default Print Format
4 = VISUALIZER Ticket
In addition to using the above key combination to change the print ticket format, the
operator (just prior to printing the ticket) can change the print ticket format at the end of the
weighing operation. This is accomplished by performing the normal weighing operation and
then pressing the desired format number (0, 1, 2, 3, 4, 5 or 6), followed by pressing the
PRINT key.
NOTE: When a print format is selected by either method, it will remain active
until changed by the operator.
36
KEYPAD FUNCTIONS, CONT.
2 = VISUALIZER Ticket
5 = VISUALIZER Ticket
8200-M698-O1 Rev B  225 Installation and Technical
3 = VISUALIZER Ticket
6 = VISUALIZER Ticket