8.
Align the mezzanine assembly with the guide pins on the system board, and then install the mezzanine
assembly on the system board.
9.
Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly latch.
10. Install the access panel.
11. Install the Server Blade .
12. Power up the Server Blade .
M.2 enablement option
To install the component:
Procedure
1.
Power down the Server Blade .
2.
Remove the Server Blade .
3.
Place the Server Blade on a flat, level work surface.
4.
Remove the access panel.
5.
Remove the left DIMM baffle.
44
M.2 enablement option