Installing A Hot-Plug Drive; Remove The Front Panel/Drive Cage Assembly - HPE ProLiant BL460c Gen10 User Manual

Installing a hot-plug drive

WARNING:
To reduce the risk of injury from electric shock, do not install more than one drive carrier at a time.
Procedure
1. Prepare the drive.
2. Install the drive.
3. Determine the status of the drive from the drive LED definitions.
To configure arrays, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website.

Remove the front panel/drive cage assembly

The server has one drive cage assembly.
34 Installing a hot-plug drive