Remove The Access Panel; Install The Access Panel - HPE ProLiant BL460c Gen10 User Manual

Remove the access panel

To remove the component:
Procedure
1. Power down the Server Blade .
2. Remove the Server Blade .
3. Place the Server Blade on a flat, level work surface.
4. Press the access panel release button.
5. Slide the access panel towards the rear of the Server Blade, and then lift to remove the panel.
1

Install the access panel

The server cover can be removed to access the internal components.
Procedure
1. Place the access panel on top of the Server Blade.
2. Slide the access panel forward until it clicks into place.
2
Remove the access panel 25