Connecting To The Network; Install The Server Blade - HPE ProLiant BL460c Gen10 User Manual

Server blade signal
FlexibleLOM
Mezzanine 1
Mezzanine 2

Connecting to the network

To connect the BladeSystem to a network, each enclosure must be configured with network interconnect
devices to manage signals between the Server Blades and the external network.
Two types of interconnect modules are available for BladeSystem c-Class enclosures: Pass-Thru modules
and switch modules. For more information about interconnect module options, see the Hewlett Packard
Enterprise website.
IMPORTANT:
To connect to a network with a Pass-Thru module, always connect the Pass-Thru module to a network
device that supports Gigabit or 10 Gb speed, depending on the corresponding Pass-Thru model.

Install the server blade

CAUTION:
To prevent improper cooling and thermal damage, do not operate the server blade enclosure unless all
bays are populated with either a component or a blank.
Interconnect bay
number
1
2
3 and 4
Interconnect bay label
Connecting to the network
Notes
—
Four-port cards connect
to bay 2.
◦ Four-port cards
◦ Ports 1 and 3 connect
to bay 3.
◦ Ports 2 and 4 connect
to bay 4.
19