Storage Controller/Nvme Pass-Through Board Options - HPE ProLiant BL460c Gen10 User Manual

4. Determine the status of the drive from the LEDs.

Storage controller/NVMe pass-through board options

To install the component:
Procedure
1. Back up all Server Blade data.
2. Power down the Server Blade .
3. Remove the Server Blade .
4. Place the Server Blade on a flat, level work surface.
5. Remove the access panel.
6. Prepare the storage controller/NVMe pass-through board for installation.
7. Align the storage controller/NVMe pass-through board with the alignment pins and lower it into Server
Blade.
8. Push the handle down into the closed position to fully seat the storage controller/NVMe pass-through
board.
2
Storage controller/NVMe pass-through board options
1
39