Install the direct connect SATA cable
The server uses removable direct connect SATA cables.
Procedure
1. Power down the Server Blade .
2. Remove the Server Blade .
3. Place the Server Blade on a flat, level work surface.
4. Remove the access panel.
5. Install the direct connect SATA cable.
a. Connect the direct connect SATA cable to the drive cage backplane.
b. Secure the captive screw.
c. Connect the other end of the cable to the system board.
d. Route and secure the cable onto the right DIMM baffle.
2
1
3
4
3
1
2
Install the direct connect SATA cable
29