Remove The Dimm Baffles - HPE ProLiant BL460c Gen10 User Manual

Remove the DIMM baffles

The server contains two DIMM baffles.
Procedure
1. Power down the Server Blade .
2. Remove the Server Blade .
3. Place the Server Blade on a flat, level work surface.
4. Remove the access panel.
5. If installed, remove the direct connect SATA cable.
6. If installed, remove the internal USB drive. To locate the internal USB connector, see "System board
components."
IMPORTANT:
When removing the right DIMM baffle, leave the Smart Storage Battery installed on the baffle. Use
the blue pull tab to disconnect the Smart Storage Battery cable from the system board.
7. Remove one or more DIMM baffles:
• DIMM baffle (right side)
• DIMM baffle (left side)
26 Remove the DIMM baffles