9.
Install the access panel.
10. Install the Server Blade .
11. Power up the Server Blade .
Smart Storage Battery option
To install the component:
Procedure
1.
Power down the Server Blade .
2.
Remove the Server Blade .
3.
Place the Server Blade on a flat, level work surface.
4.
Remove the access panel.
5.
If installed, remove the direct connect SATA cable.
6.
If installed, remove the internal USB drive. To locate the internal USB connector, see "System board
components."
7.
Remove the right DIMM baffle.
8.
Install the Smart Storage Battery on the DIMM baffle.
40
Smart Storage Battery option