Re-Entering The Server Serial Number And Product Id; Utilities And Features; Hpe Smart Storage Administrator; Rompaq Utility - HPE ProLiant BL460c Gen10 User Manual

the UEFI BIOS settings using the iLO RESTful API, a management interface that server management tools
can use to perform configuration, inventory, and monitoring of a ProLiant server. The iLO RESTful API uses
basic HTTPS operations (GET, PUT, POST, DELETE, and PATCH) to submit or return JSON-formatted data
with iLO web server.
For more information about the iLO RESTful API and the RESTful Interface Tool, see the Hewlett Packard
Enterprise website.

Re-entering the server serial number and product ID

After you replace the system board, you must re-enter the Server Blade serial number and the product ID.
1. During the Server Blade startup sequence, press the F9 key to access UEFI System Utilities.
2. Select the System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced System ROM Options > Serial Number, and then press the Enter key.
3. Enter the serial number and press the Enter key. The following message appears:The serial number
should only be modified by qualified service personnel. This value should
always match the serial number located on the chassis.
4. To clear the warning, press the Enter key.
5. Enter the serial number and press the Enter key.
6. Select Product ID. The following warning appears:Warning: The Product ID should ONLY be
modified by qualified service personnel. This value should always match the
Product ID located on the chassis.
7. Enter the product ID and press the Enter key.
8. To confirm exiting System Utilities, press the F10 key. The Server Blade automatically reboots.

Utilities and features

HPE Smart Storage Administrator

The HPE SSA is a configuration and management tool for HPE Smart Array controllers. Starting with HPE
ProLiant Gen8 servers, HPE SSA replaces ACU with an enhanced GUI and additional configuration features.
The HPE SSA exists in three interface formats: the HPE SSA GUI, the HPE SSA CLI, and HPE SSA
Scripting. Although all formats provide support for configuration tasks, some of the advanced tasks are
available in only one format.
Some HPE SSA features include the following:
• Supports online array capacity expansion, logical drive extension, assignment of online spares, and RAID
or stripe size migration
• Provides diagnostic and SmartSSD Wear Gauge functionality on the Diagnostics tab
• For supported controllers, provides access to additional features.
For more information about HPE SSA, see the Hewlett Packard Enterprise website.

ROMPaq utility

The ROMPaq utility enables you to upgrade the system firmware (BIOS). To upgrade the firmware, insert a
ROMPaq USB Key into an available USB port and boot the system. In addition to ROMPaq, Online Flash
Components for Windows and Linux operating systems are available for updating the system firmware.
The ROMPaq utility checks the system and provides a choice (if more than one exists) of available firmware
revisions.
To locate the drivers for a particular server, go to the Hewlett Packard Enterprise website. Under Select
your HPE product, enter the product name or number and click Go.
Re-entering the server serial number and product ID 67