Mezzanine Card Option - HPE ProLiant BL460c Gen10 User Manual

12. If removed, install the direct connect SATA cable.
13. If removed, install the internal USB drive. To locate the internal USB connector, see "System board
components."
14. Install the access panel.
15. Install the Server Blade .
16. Power up the Server Blade .

Mezzanine card option

Optional mezzanine cards are classified as Type A mezzanine cards and Type B mezzanine cards. The type
of the mezzanine card determines where it can be installed in the Server Blade.
• Install Type A mezzanine cards on Mezzanine 1 connector or Mezzanine 2 connector.
• Install Type B mezzanine cards on Mezzanine 2 connector.
Optional mezzanine cards enable network connectivity or provide Fiber Channel support. For mezzanine card
locations, see "System board components."
When installing a mezzanine option on mezzanine connector 2, processor 2 must be installed.
For mezzanine card mapping, see "Interconnect bay numbering and device mapping."
To install the component:
Procedure
1. Power down the Server Blade .
2. Remove the Server Blade .
3. Place the Server Blade on a flat, level work surface.
4. Remove the access panel.
5. Remove the mezzanine assembly.
42 Mezzanine card option