Remove the storage controller/NVMe pass-through board
1. Back up all Server Blade data.
2. Power down the Server Blade .
3. Remove the Server Blade .
4. Place the Server Blade on a flat, level work surface.
5. Remove the access panel.
6. Prepare the storage controller/NVMe pass-through board for removal.
7. Remove the storage controller/NVMe pass-through board.
Storage controller/NVMe pass-through board options
To install the component:
Procedure
1.
Back up all Server Blade data.
2.
Power down the Server Blade .
32
Remove the storage controller/NVMe pass-through board
2
1