Hpe Trusted Platform Module 2.0 Gen10 Option; Overview; Tpm 2.0 Location - HPE ProLiant BL460c Gen10 User Manual

HPE Trusted Platform Module 2.0 Gen10 option

Overview

Use these instructions to install and enable an HPE TPM 2.0 Gen10 Kit in a supported Server Blade. This
option is not supported on Gen9 and earlier Server Blades.
This procedure includes three sections:
1. Installing the Trusted Platform Module board.
2. Enabling the Trusted Platform Module.
3. Retaining the recovery key/password.
HPE TPM 2.0 installation is supported with specific operating system support such as Microsoft
®
Server 2012 R2 and later. For more information about operating system support, see the product
QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs). For more information
about Microsoft
www.microsoft.com).
CAUTION:
Chipset-TPM is not available after the HPE TPM 2.0 Gen10 Kit is installed and configured in System
Utilities. Do not install the HPE TPM 2.0 Gen10 Kit if Chipset-TPM is enabled and the operating system
is using Chipset-TPM features. Otherwise, the OS may go into recovery mode, data loss can occur, or
both. If an OS is installed and using Chipset-TPM, follow the OS vendor instructions to disable the OS
TPM features before changing any TPM functionality.
CAUTION:
If the TPM is removed from the original Server Blade and powered up on a different Server Blade, data
stored in the TPM including keys will be erased.
IMPORTANT:
In UEFI Boot Mode, the HPE TPM 2.0 Gen10 Kit can be configured to operate as TPM 2.0 (default) or
TPM 1.2 on a supported Server Blade. In Legacy Boot Mode, the configuration can be changed
between TPM 1.2 and TPM 2.0, but only TPM 1.2 operation is supported.

TPM 2.0 location

The TPM 2.0 is located on the system board near the front of the Server Blade.
50 HPE Trusted Platform Module 2.0 Gen10 option
® ®
Windows BitLocker Drive Encryption feature, see the Microsoft website (http://
®
Windows