Front Panel Led Power Fault Codes; Serial Label Pull Tab Information - HPE ProLiant BL460c Gen10 User Manual

Item
3
4

Front panel LED power fault codes

The following table provides a list of power fault codes and the subsystems that are affected. Not all power
faults are used by all Server Blades.
Subsystem
System board
Processor
Memory
Riser board PCIe slots
FlexibleLOM
Removable HPE Flexible Smart Array controller/Smart SAS HBA
controller
System board PCIe slots
Power backplane or storage backplane
Power supply

Serial label pull tab information

The serial label pull tab is located on the front panel of the Server Blade. To locate the serial label pull tab,
see Front panel components. The serial label pull tab provides the following information:
Description
Health LED
Power On/Standby button and
system power LED
Status
Solid green = Normal
Flashing green (1 flash per
second) = iLO is rebooting
Flashing amber = System
degraded
Flashing red (1 flash per second) =
System critical
If the health LED indicates a
degraded or critical state, review
the system IML or use iLO to
review the system health status.
Solid green = System on
Flashing green (1 flash per
second) = Performing power on
sequence
Solid amber = System in standby
Off = No power present
Facility power is not present,
power cord is not attached, no
power supplies are installed,
power supply failure has occurred,
or the blade is not plugged in.
Front panel LED behavior
1 flash
2 flashes
3 flashes
4 flashes
5 flashes
6 flashes
7 flashes
8 flashes
9 flashes
Front panel LED power fault codes 9