Installing A Dimm - HPE ProLiant BL460c Gen10 User Manual

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).

Installing a DIMM

The server supports up to 24 DIMMs.
Prerequisites
Before installing this option, be sure you have the following:
The components included with the hardware option kit
For more information on specific options, see the Server Blade QuickSpecs on the Hewlett Packard
Enterprise website.
Procedure
1. Power down the Server Blade (Power down the Server Blade on page 22).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the Server Blade.
3. Remove the Server Blade from the rack (Remove the Server Blade on page 23).
4. Remove the access panel.
5. Open the slot latches.
6. Install the .
7. Install the access panel.
8. Install the Server Blade in the rack.
9. Connect each power cord to the Server Blade.
10. Connect each power cord to the power source.
11. Power up the Server Blade (Power down the Server Blade on page 22).
Use the BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to configure the memory mode.
For more information about LEDs and troubleshooting failed s, see #unique_60.
Installing a DIMM 47