Chapter 5 Data Storage and Review
Orion Star A112 benchtop conductivity and Star A122 portable conductivity meters have a 50-point datalog memory.
Automatic Datalog with AUTO-READ™ Mode
1. In measurement mode, press
2. Press
3. Press
4. Press
5. Press
6. Press
The reading will automatically be stored in the datalog.
Manual Datalog with Continuous Read Mode
1. In measurement mode, press
2. Press
3. Press
4. Press
5. Press
6. Press
7. In the measurement mode, press
Viewing Stored Readings (the Data Log)
1. In measurement mode, press
2. Press
3. Press
Thermo Scientific Orion Star A112 Benchtop and Star A122 Conductivity Portable Meters
.
three times until "4.0" is shown on the top line and "READ" is shown on the lower line. Press
or
to show "AUTO" on the second line. Press
to show "5.0" on the top line and "LOG" on the lower line. Press
to show "ON" on the second line. Press
to return to measurement mode. Each time the reading is locked onto the screen with the "AR" icon.
.
three times until "4.0" is shown on the top line and "READ" is shown on the lower line. Press
or
to show "CONT" on the second line. Press the "Mode/enter" key to save selection.
to show "5.0" on the top line and "LOG" on the lower line. Press
to show "ON" on the second line. Press
to return to measurement mode.
to store the reading into the meter's memory.
.
or
to scroll through the memory points.
to review the reading stored at that point.
to save selection.
.
to save selection.
.
to save selection.
.
.
13