Table G-2 Coupled Commands - Keithley 2182 User Manual

Table G-1 (cont.)
IEEE-488 documentation requirements
Requirements
(15) Macro information.
(16) Response to *IDN (identification).
(17) Storage area for *PUD and *PUD?
(18) Resource description for *RDT and *RDT?
(19) Effects of *RST, *RCL and *SAV.
(20) *TST information.
(21) Status register structure.
(22) Sequential or overlapped commands.
(23) Operation complete messages.
Table G-2
Coupled commands
Command
:TRAC:POIN
:TRAC:CLE
Sense Subsystem Commands:
...:RANG:UPP
...:REF:ACQ
:SENS:VOLT:DC:RAT ON
:SENS:VOLT:DC:DELT ON
... = Valid function command words (i.e., :VOLT:DC, :VOLT:AC, etc.)
IEEE-488 and SCPI Conformance Information
Also changes
:TRAC:FEED:CONT
:TRAC:FEED:CONT
...:RANG:AUTO
...:REF
:SENS:VOLT:DC:DELT
:SENS:HOLD:STAT
:SENS:VOLT:DC:RAT
:SENS:HOLD:STAT
:SENS:VOLT:DC:CHAN1:DFILT:TCON REP
Description or reference
Not applicable.
See "Common Commands"
Not applicable.
Not applicable.
See "Common Commands"
See "Common Commands"
See Status Structure in Section
All are sequential except :INIT and
:INIT:CONT ON, which are overlapped.
*OPC, *OPC? and *WAI; see
Commands" in Section
To
NEV
NEV
OFF
presently displayed reading
OFF
OFF
OFF
OFF
MOV
G-3
in Section 12.
in Section 12.
in Section 12.
11.
"Common
12.