Table of Contents
Advertisement
1-10
Getting Started
4 Display annunciators
* (asterisk)
↔ (more)
)
)
AUTO
BUFFER
CH1
CH2
CH1 and CH2
ERR
FAST
FILT
HOLD
LSTN
MATH
MED
REAR
REL
REM
SCAN
SHIFT
SLOW
SRQ
STAT
STEP
TALK
TIMER
TRIG
5 Input connector
CHANNEL 1
CHANNEL 2
6 Handle
Pull out and rotate to desired position.
Readings being stored in buffer.
Indicates additional selections are available.
)
(speaker)
Beeper on for limit testing.
Autorange enabled.
Recalling readings stored in buffer.
Channel 1 input displayed.
Channel 2 input displayed.
Ratio (V1/V2) reading displayed.
Questionable reading, or invalid cal step.
Fast (0.1 PLC) reading rate selected.
Filter enabled.
Instrument in hold mode.
Instrument addressed to listen over GPIB.
mX+b or Percent (%) calculation enabled.
Medium (1 PLC) reading rate selected.
Indicates that Analog Output is on.
Relative enabled for present measurement function.
Instrument in GPIB remote mode.
Scan mode selected.
Accessing a shifted key.
Slow (5 PLC) reading rate selected.
Service request over GPIB.
Displaying buffer statistics.
Step mode selected.
Instrument addressed to talk over GPIB bus.
Timer controlled scans in use.
External triggering (front panel, bus or trigger link) selected.
Measure voltage or temperature. Volts Ranges: 10mV, 100mV, 1V,
10V, and 100V.
Measure voltage or temperature. Volts Ranges: 100mV, 1V, and 10V.
Advertisement
Table of Contents
