Table of Contents
Advertisement
4-4
Relative, mX+b, and Percent (%)
SCPI programming - relative
Table 4-1
SCPI commands - relative
Commands
For DCVI and DCV2:
:SENSe
:VOLTage
[:CHANnel1]
:REFerence <n>
:STATe <b>
:ACQuire
:CHANnel2
:REFerence <n>
:STATe <b>
:ACQuire
For TEMP1 and TEMP2:
:SENSe
:TEMPerature
[:CHANnel1]
:REFerence <n>
:STATe <b>
:ACQuire
:CHANnel2
:REFerence <n>
:STATe <b>
:ACQuire
For Analog Output:
:OUTPut
:RELative <b>
Description
SENSe Subsystem:
Volts function:
Channel 1 (DCV1):
Specify rel value: –120 to 120 (volts).
Enable or disable relative.
Use input signal as rel value.
Channel 2 (DCV2):
Specify rel value: –12 to 12 (volts).
Enable or disable relative.
Use input signal as rel value.
SENSe Subsystem:
Temperature function:
Channel 1 (TEMP1):
Specify rel value: –273 to 1800.
Enable or disable relative.
Use input signal as rel value.
Channel 2 (TEMP2):
Specify rel value: –273 to 1800.
Enable or disable relative.
Use input signal as rel value.
OUTPut Subsystem:
Enabling (ON) relative uses the analog output voltage as
the rel value. Sending ON with rel already enabled
acquires a new rel value.
Default
0
OFF
0
OFF
0
OFF
0
OFF
OFF
Advertisement
Table of Contents
