General Information; Warranty Information; Contact Information; Safety Symbols And Terms - Keithley 2182 User Manual

Nanovoltmeter
Hide thumbs Also See for 2182:
Table of Contents

Advertisement

General information

Warranty information

Warranty information is located at the front of this manual. Should your Model 2182 require
warranty service, contact the Keithley representative or authorized repair facility in your area for
further information. When returning the instrument for repair, be sure to fill out and include the
service form at the back of this manual to provide the repair facility with the necessary
information.

Contact information

Worldwide phone numbers are listed at the front of this manual. If you have any questions,
please contact your local Keithley representative or call one of our Application Engineers at
1-800-348-3735 (U.S. and Canada only).

Safety symbols and terms

The following symbols and terms may be found on the instrument or used in this manual:
The
instructions located in the manual.
The
Use standard safety precautions to avoid personal contact with these voltages.
The WARNING heading used in this manual explains dangers that might result in personal
injury or death. Always read the associated information very carefully before performing the
indicated procedure.
The CAUTION heading used in this manual explains hazards that could damage the
instrument. Such damage may invalidate the warranty.

Inspection

The Model 2182 was carefully inspected electrically and mechanically before shipment.
After unpacking all items from the shipping carton, check for any obvious signs of physical
damage that may have occurred during transit. (There may be a protective film over the display
lens, which can be removed). Report any damage to the shipping agent immediately. Save the
original packing carton for possible future shipment. The following items are included with
every Model 2182 order:
!
symbol on an instrument indicates that the user should refer to the operating
symbol on an instrument shows that high voltage may be present on the terminal(s).
Model 2182 Nanovoltmeter with line cord.
Model 2107-4 Input Cable.
Four alligator clips that attach to the copper lugs of the Model 2107 Input Cable.
DeoxIt copper cleaning solution.
Accessories as ordered.
Certificate of calibration.
Model 2182 User's Manual (P/N 2182-900-00).
Model 2182 Service Manual (P/N 2182-902-00).
Manual Addenda (pertains to any improvements or changes concerning the instrument
or manual.
Getting Started
1-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

2182a

Table of Contents