Table 14-6 Route Command Summary - Keithley 2182 User Manual

14-6 SCPI Reference Tables
Table 14-5
OUTPut command summary
Command Description
:OUTPut
:GAIN <NRf> Set analog output gain (M); -100e6 to 100e6
:GAIN? Query analog output gain.
:OFFSet <NRf> Set analog output offset (B); -1.2 to 1.2.
:OFFSet? Query analog output offset.
[:STATe] <b> Enable or disable analog output (OFF forces 0V).
[:STATe]? Query state of analog output.
:RELative <b> ON uses the present analog output voltage as the Rel value.
OFF disables analog output Rel.
:RELative? Query state of Rel.
Table 14-6
ROUTe command summary
Command
:ROUTe
:SCAN
:INTernal
:CCOunt <n>
:CCOunt?
[:EXTernal] <list>
:LSELect <name>
:LSELect?
Description
Path to configure and control scanning:
Internal scanning:
Specify number of readings on Channel 1; 1 to 1023.
Query Channel 1 count.
Specify external scan list.
Select and enable scan operation; INTernal, EXTernal
or NONE.
Query selected scan operation.
Default
Parameter Ref SCPI
Sec 10
1
0
ON
OFF
Default
Parameter Ref SCPI
Sec 9
√
(@1:10)