Table of Contents
Advertisement
Table 14-7
SENSe command summary (cont.)
Command
:TEMPerature
:TRANsducer <name>
:TRANsducer?
:TCouple
[:TYPE] <type>
[:TYPE]?
:RJUNction
:RSELect <name>
:RSELect?
:SIMulated <n>
:SIMulated?
:RTEMperature?
:NPLCycles <n>
:NPLCycles?
:APERture <n>
:APERture?
:DIGits <n>
:DIGits?
[:CHANnel1]
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:LPASs
[:STATe] <b>
[:STATe]?
:DFILter
:WINDow <n>
:WINDow?
:COUNt <n>
:COUNt?
:TCONtrol <name>
:TCONtrol?
[:STATe] <b>
[:STATe]?
Description
Path to configure temperature:
Specify transducer; TCouple or INTernal.
Query transducer.
Thermocouple (TC):
Set TC type; J, K, T, E, R, S, B or N.
Query TC type.
Reference junction:
Set reference type; SIMulated or INTernal.
Query reference type.
Specify simulated temperature in °C; 0 to 60.
Query simulated temperature.
Query internal temperature.
Set integration rate in line cycles (PLC); 0.01 to 60
(60Hz) or 0.01 to 50 (50Hz).
Query NPLC.
Set integration rate in seconds; 166.67e–6 to 1
(60Hz) or 200e–6 to 1 (50Hz).
Query Aperture.
Set display resolution; 4 to 7.
Query display resolution.
Channel 1 temperature commands:
Specify reference (Rel) value for Channel 1; –328
to 3310
Enable or disable Rel.
Query state of Rel.
Use input signal as Rel.
Query Rel value.
Control analog filter for TEMP1:
Enable or disable analog filter.
Query state of analog filter.
Configure and control digital filter:
Specify filter window (in %); 0 to 10.
Query filter window.
Specify filter count; 1 to 100.
Query filter count.
Select filter type; MOVing or REPeat.
Query filter type.
Enable or disable digital filter.
Query state of digital filter
SCPI Reference Tables
Default
Parameter
Ref
TCouple
Sec 2
Sec 2
J
Sec 2
INTernal
23
Sec 2
5
Sec 3
83.33
6
Sec 3
0
Sec 4
OFF
Sec 3
OFF
Sec 3
0.01
10
MOVing
ON
14-9
SCPI
Advertisement
Table of Contents
