Keithley 2182 User Manual page 282

D-4 Model 182 Emulation Commands
Table D-1
Model 182 device-dependent command summary (cont'd)
Mode
Alternate Output
Analog Output
Trigger Delay
Execute
Terminators
Reading Relative
Command Description
T4 Multiple on X
T5 One-shot on X
T6 Multiple on external
T7 One-shot on external
T8 Multiple on manual (TRIG key) or bus H0X
T9 One-shot on manual (TRIG key) or bus H0X
T10 Disable all triggers
U0 Send machine status
U1 Send error conditions
U2 Send firmware revision
U3 Send buffer length
U4 Send buffer average
U5 Send buffer standard deviation
U6 Send reading relative value
U7 Send analog output relative value
U8 Send analog output gain value
U9 Send trigger interval
U10 Send trigger delay
U12 Send calibration lock status
U13 Send Model 181-like machine status
V0,gain Analog output gain (0.001 to 999999.999)
W0 Disable trigger delay
Wvalue Enable trigger delay; delay = value (1msec to
999999msec)
X Execute other device-dependent commands
Y0 <CR LF>
Y1 <LF CR>
Y2 <CR>
Y3 <LF>
Y10 <CR LF>
Y13 <LF CR>
Z0 Disable reading relative
Z1 Enable reading relative using next reading
Z2,value Enable reading relative using value (±1e-9 to ±120)
Z3 Enable reading relative, use present value
Note
9
10
11