Getting Started - Keithley 2182 User Manual

Bottom Row
Un-shifted
STEP Steps through channels; sends a trigger after each channel.
SCAN Scans through channels; sends a trigger after last channel.
SAVE Saves present configuration for power-on user default.
RESTR Restores factory or user default configuration.
DIGITS Changes number of digits of reading resolution.
RATE Changes reading rate; number of power line cycles (PLC).
EXIT Cancels selection, moves back to measurement display.
ENTER Accepts selection, moves to next choice or back to measurement display.
Shifted
CONFIG Configures a scan (type, timer, channel count, and reading count).
HALT Turns off step/scan operation.
GPIB Enables/disables GPIB, sets address, and selects language.
RS232 Enables/disables RS-232 interface, selects baud rate, flow control, and
terminator.
CAL Accesses calibration.
TEST Tests display annunciators and front panel keys.
3 Range keys
Selects the next higher voltage measurement range.
Selects the next lower voltage measurement range.
AUTO Enables/disables autorange.

Getting Started

1-9