Keithley 2182 User Manual page 232

14-8 SCPI Reference Tables
Table 14-7
SENSe command summary (cont.)
Command
:REFerence?
:LPASs
[:STATe] <b>
[:STATe]?
:DFILter
:WINDow <n>
:WINDow?
:COUNt <n>
:COUNt?
:TCONtrol <name>
:TCONtrol?
[:STATe] <b>
[:STATe]?
:CHANnel2
:LQMode <b>
:LQMode?
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:LPASs
[:STATe] <b>
[:STATe]?
:DFILter
:WINDow <n>
:WINDow?
:COUNt <n>
:COUNt?
:TCONtrol <name>
:TCONtrol?
[:STATe] <b>
[:STATe]?
Description
Query Rel value.
Control analog filter for DCV1:
Enable or disable analog filter.
Query state of analog filter.
Configure and control digital filter:
Specify filter window (in %); 0 to 10.
Query filter window.
Specify filter count; 1 to 100.
Query filter count.
Select filter type; MOVing or REPeat.
Query filter type.
Enable or disable digital filter.
Query state of digital filter.
Channel 2 voltage commands:
Enable or disable low charge-injection mode.
Query state of low charge-injection mode.
Configure channel 2 measurement range:
Select range; 0 to 12 (volts).
Query range value.
Enable or disable autorange.
Query state of autorange.
Specify reference (Rel) value for Channel 2;
–12 to 12 (volts).
Enable or disable Rel.
Query state of Rel.
Use the voltage on Channel 2 as Rel.
Query Rel value.
Control analog filter for DCV2:
Enable or disable analog filter.
Query state of analog filter.
Configure and control digital filter:
Specify filter window (in %); 0 to 10.
Query filter window.
Specify filter count; 1 to 100.
Query filter count.
Select filter type; MOVing or REPeat.
Query filter type.
Enable or disable digital filter.
Query state of digital filter.
Default
Parameter Ref SCPI
√
Sec 3
OFF
Sec 3
0.01
10
MOVing
ON
OFF
Sec 2
Sec 3 √
12 √
√
ON √
√
0 Sec 4 √
√
ON
√
√
Sec 3
OFF
Sec 3
0.01
10
MOVing
ON