Welding Process Setup Menu; Accessing The Setup Menu; Changing Welding Parameters; Exiting The Setup Menu - Fronius TransPocket 150 TIG Operating Instructions Manual

Welding process Setup menu

Accessing the
1
Setup menu
2
Changing weld-
1
ing parameters
2
3
4
Exiting the
1
Setup menu
Parameters for
Para-
MMA welding
meter
Use the Welding Process button to select the process whose
Setup parameters are to be changed:
- MMA welding
- MMA welding with Cel electrode
- TIG welding
Press the Setting Value and Welding Process buttons at the same
time
- The code for the first parameter in the Setup menu is dis-
played on the control panel
Turn the adjusting dial to select the required parameter
Press the adjusting dial to display the preset value of the parameter
Turn the adjusting dial to change the value
- the new value becomes effective immediately
- exception: when restoring the factory settings, press the adjust-
ing dial after changing the value to activate the new value.
Press the adjusting dial to return to the list of parameters
Press the Setting Value or Welding Process button to exit the
Setup menu
Description
Starting current duration
For the SoftStart / HotStart function
Factory setting: 0.5 seconds
Range Unit
0.1 - 2.0 Second
s
41