Solid Fuel Measurement - TESTO 300 LL NEXT LEVEL Instruction Manual

9 Performing the measurement
Formula
symbol
CNOx, B
RO
OEM
qA
tA
FT
UF
UCO, B
ECO, B
UNOx, B
RNOx,B

Solid fuel measurement

9.5.5
For performing solid fuel measurements complying with the 1st
BlmSchV, a testo 300 NEXT LEVEL is required with the following
equipment:
CO sensor H2-compensated for measurements (measuring range
•
for 1st BImSchV measurement min. 20,000 ppm)
• Measuring range extension by fresh air dilution
• Solid fuel adapter and probe shaft with pre-filter 0600 9765
1
Call up function:
2 |
| Options | Averaging | On
3
Zeroing is carried out.
 The list for averaging opens.
The start button changes to
64
Designation
Current NOx concentration
Reference oxygen content
Measured oxygen volume content in dry flue gas
Flue gas loss
Flue gas temperature in °C
Combustion air temperature in °C
expanded uncertainty of flue gas loss
Expanded uncertainty of CO concentration converted to
reference oxygen content
Result of CO concentration converted to reference oxygen
content
Expanded uncertainty of NOx concentration converted to
reference oxygen content
Result of NOx concentration converted to reference
oxygen content
Flue Gas
|
.