Installing The 19-Inch Sliding Rail Kit With The Cma - Oracle Netra SPARC S7-2 Installation Manual

Installing the 19-Inch Sliding Rail Kit With the CMA

11. Connect required and optional cables.
See "Connecting Cables" on page
12. Consider your next step:
■ For an existing server, return the server to operation by following the steps
in the service manual.
For a new server, continue the installation by following the steps in this
■
guide.
Related Information
"19-Inch Hardmount Kit (4-Post Rack) Components" on page 35
■
"Tools Needed for Installation" on page 29
■
"Handling Precautions" on page 28
■
"Rack Cautions" on page 32
■
Installing the 19-Inch Sliding Rail Kit With the CMA
These topics describe how to install the server using the optional 19-inch sliding rail kit with the
CMA.
"19-Inch Sliding Rail Kit With the CMA Components" on page 41
■
"Install the Server (4-Post, 19-Inch Sliding Rails With CMA Rack Kit)" on page 42
■
Related Information
"Tools Needed for Installation" on page 29
■
"Handling Precautions" on page 28
■
"Rack Cautions" on page 32
■
40 Netra SPARC S7-2 Server Installation Guide • January 2017
61.