Assembling And Connecting Dc Power Cords - Oracle Netra SPARC S7-2 Installation Manual

Do not attach the power cords to the power supplies at this time.
3. Connect a device to the SER MGT port.
See "Connect a Terminal or Emulator to the SER MGT Port" on page
Related Information
"Connect the Chassis Ground Wire" on page 72
■
"Rear Panel Components (Installation)" on page 15
■
"Powering On the Server for the First Time" on page 71
■

Assembling and Connecting DC Power Cords

These topics describe how to assemble DC power cords and apply power.
Step
1.
2.
3.
Description
Build the DC power cords and connect them to
the server.
Connect the chassis ground wire.
Connect the DC power cords to the DC power
source.
Assembling and Connecting DC Power Cords
81.
Links
"Assemble the DC Input Power Cords" on page 76
"Connect the Chassis Ground Wire" on page 72
"Connect DC Power Source" on page 80
Powering On the Server for the First Time 75