Installing The Os; Configure The Preinstalled Os - Oracle Netra SPARC S7-2 Installation Manual

Installing the OS

Installing the OS
Use these topics to either configure the preinstalled OS or use an alternative OS.
"Configure the Preinstalled OS" on page 86
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 87
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 88
■
Related Information
"Oracle Solaris OS Configuration Parameters" on page 91
■

Configure the Preinstalled OS

Determine which OS you will use.
1.
If you plan to use the preinstalled OS, proceed to step 2.
■
If you do not plan to use the preinstalled OS, go to
■
a Fresh OS (Oracle ILOM CLI)" on page 87
Fresh OS (Oracle ILOM Web Interface)" on page
2. When prompted, follow the onscreen instructions for configuring the Oracle
Solaris OS on your host.
You are prompted to confirm the configuration several times, enabling confirmation and
changes. If you are not sure how to respond to a particular value, you can accept the default
and make future changes when the Oracle Solaris OS is running. See
Configuration Parameters" on page 91
you must provide during initial configuration.
Log in to the server.
3.
You can now enter Oracle Solaris OS commands at the prompt. For more details, refer to the
Oracle Solaris 11 OS man pages and documentation at:
http://www.oracle.com/goto/solaris11/docs
Related Information
"Connect AC Power Cords" on page 74
■
86 Netra SPARC S7-2 Server Installation Guide • January 2017
or "Reach a State to Install a
88.
for a description of the Oracle Solaris OS parameters
"Reach a State to Install
"Oracle Solaris OS