Oracle Netra SPARC S7-2 Installation Manual page 89

There are many methods by which you can install the OS. For example, you can boot and install
the OS from DVD media or from another server on the network.
For more information about the methods, refer to Installing Oracle Solaris 11 Systems,
comparing installation options at:
http://www.oracle.com/goto/solaris11/docs
If you have not done so, perform these tasks to access the Oracle ILOM web
2.
interface on the server.
a. In a browser on the same network as the system, type the IP address.
Log in to Oracle ILOM by typing your user name and password.
b.
In the Oracle ILOM web interface, in the left navigation pane, choose Host
3.
Management → Host Boot Mode.
The Host Boot Mode page is displayed.
Apply these changes to the Host Boot Mode Settings.
4.
For State, select: Reset NVRAM.
a.
This setting applies a one-time NVRAM (OpenBoot) change based on the script setting,
then resets the NVRAM to default settings on the next host reset.
b. For Script, type:
This setting configures the host to stop at the ok prompt instead of automatically booting
the preinstalled OS.
c. Click Save.
You have 10 minutes to perform the next step. After 10 minutes, the state is
Note -
automatically returned to normal.
In the left navigation panel, click on Host Management → Power Control.
5.
Select Reset from the pull-down menu, and click Save.
6.
In the left navigation panel, click on Remote Control → Redirection.
7.
8. Select Use Serial Redirection, and click Launch Remote Console.
Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)
setenv auto-boot? false
Powering On the Server for the First Time 89