Disable Nebs Mode - Oracle Netra SPARC S7-2 Installation Manual

See "Installing the OS" on page
Related Information
"Connect Other Data Cables" on page 65
■
"Oracle ILOM System Console" on page 82
■
"Configure the Preinstalled OS" on page 86
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 87
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 88
■

Disable NEBS Mode

NEBS mode is enabled by default, which places the maximum power state to P7, so that
the server will not reduce speed when high temperatures are detected. If you prefer full
performance over NEBS, disable this feature.
To disable NEBS mode, type:
1.
->cd /HOST
/HOST
-> ls
/HOST
Targets:
Properties:
->set nebs_mode=disabled
2. Continue with the installation by installing the OS.
See "Installing the OS" on page
Related Information
"Oracle ILOM System Console" on page 82
■
"Configure the Preinstalled OS" on page 86
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 87
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 88
■
86.
...
autorestart = reset
...
nebs_mode = enabled
...
86.
Powering On the Server for the First Time
Disable NEBS Mode
85